Articles
How to use Hammerite Prosto Na Rdzę / Direct to Rust?
- How is Hammerite applied to rust covered metal surfaces?
- How is Hammerite applied to previously painted surfaces?
- How is Hammerite applied to new or bare steel or iron?
- Hammerite paints in the store's offer Masterbaushop.de
How is Hammerite applied to rust covered metal surfaces?
The formula of Hammerite paint has been specifically formulated to be applied directly to rust covered metal with minimal surface preparation.
surface preparation
- Remove loose rust with a wire brush or coarse sandpaper. You don't need to clean the surface of any rust or sand it to pure metal.
- Clean the surface with water and a detergent (dishwashing liquid). For previously unpainted or heavily soiled surfaces, use Hammerite Solvent.
- Rinse with water and let dry.
painting
Paint the prepared surface directly with Hammerite paint. Thanks to the 3-in-1 formula, you don't need to use primer or primer.
- Open a can of Hammerite paint.
- Stir the contents slowly and thoroughly. Remember – do not dilute the paint!
- Apply a thick layer of paint, carefully covering all edges and corners.
- After 6 hours apply a second thick coat of paint in the same way.
For glossy, matt and semi-matt surfaces it is recommended to use a brush or roller. Hammerite in hammer finish should be applied with a brush.
How is Hammerite applied to previously painted surfaces?
Apply a small amount of Hammerite Straight To Rust paint to the already painted surface and allow to dry for an hour. If an undesirable reaction (such as paint rippling) occurs, remove any old paint from the surface.
surface preparation
- If the test shows no response, use a wire brush or coarse sandpaper to remove loose parts of the old coating.
- Clean the surface with water and a detergent (washing-up liquid).
- Rinse with water and let dry.
painting
Open a can of Hammerite paint and stir the contents slowly and thoroughly. Remember – do not dilute the paint! Apply a thick coat of paint, carefully covering all edges and corners. After 6 hours, apply a second, thick coat of paint in the same way.
For glossy, matt and semi-matt surfaces it is recommended to use a brush or roller. Hammerite in hammer finish should be applied with a brush.
How is Hammerite applied to new or bare steel or iron?
The Hammerite provides corrosion protection on both corroded metals and new or bare surfaces.
surface preparation
- Roughen smooth and shiny surfaces with sandpaper, for example.
- Remove the resulting dust and dirt with a dry cloth or brush.
- Clean the surface with Hammerite Thinner.
- Let it dry.
painting
Paint the prepared surface directly with Hammerite paint. Thanks to the 3-in-1 formula, you don't need to use primer or primer.
- Open a can of Hammerite paint
- Stir the contents slowly and thoroughly. Remember – do not dilute the paint!
- Apply a thick layer of paint, carefully covering all edges and corners.
- After 6 hours apply a second thick coat of paint in the same way.
For glossy, matt and semi-matt surfaces it is recommended to use a brush or roller. Hammerite in hammer finish should be applied with a brush.
The item is based on materials manufactured by the Hammerite company.
Hammerite paints in the store's offer Masterbaushop.de
Check out the range of paints that can be applied directly to rusty surfaces. Protect metal objects, household and garden tools from rust. click on the pictureto go to the Hammerite paint range.
