Semin Sem Murale glass fabric glue
Paste for light wall coverings fiberglass wallpaper
5kg | 10kg
Semin Sem Murale, a ready-to-use paste with emulsion resin, is suitable for the application of all types of soft wallcoverings, as well as fiberglass wallpaper, even in humid environments.
TECHNICAL DESCRIPTION
Aqueous dispersion paste, odorless, ready to use, for elastic wall coverings.
Can be used indoors on walls and ceilings. Suitable for gluing fiberglass wallpaper, even in damp rooms.
COMPOSITION AND APPEARANCE
Resin emulsion, starch, rheology agent and various additives. The putty is white.
PERMITTED SUBSTRATES
Interior walls and ceilings:
concrete
plasterboard
primer
gypsum blocks
cement plaster
COATINGS
Textiles with or without paper backing material. Large width fabrics on foam or molleton.
PVC panels coated on the back, paper or polyester fabrics. Paintable fiberglass wallpaper.
Thin styrofoam sheets. depron.
TECHNICAL CHARACTERISTICS
Airing time: 5 to 10 minutes.
Correctability time: 30 minutes.
Setting time: 12 to 24 hours.
Density: approx. 1.
Dry extract: 14 %.
APPLICATION NOTICE
Close the bucket again after use.
Application temperature : 8 to 35 °C.
Use SEM-PLAST on smooth, non-absorbent surfaces.
CONSUMPTION
150 to 250 g/m², depending on the lining and application tool.
Application and method of gluing Follow the recommendations of the panel manufacturer.
It is applied by simply pasting the surface with a roller, a brush or a notched trowel.
Only paste one surface that corresponds to a maximum of 2 strips of wallpaper.
Position the strip of wallpaper and stick from the center to the edges.
Remove excess paste with a sponge.
Cleaning the tools with water.
ELIGIBLE PRODUCTS
DURCIFOND for elastic and floury substrates.
SEMIN PRIMER as an undercoat for plasterboard.
PACKAGING
5 and 10 kg buckets
* ONLY ORIGINAL FROM THE MANUFACTURER *