Mapei Ultraplan Eco 20 Quick-setting leveling compound, leveling compound 5 / 10x23kg
€ 90.00 – € 360.00
- GBP: £75.79 - 303.16£
Mapei Ultraplan Eco 20 quick-setting leveling compound flow filler 5/10/15/20x23kg
Quick-drying and fast-setting self-leveling cementitious paste for ceramic linings and cladding for layers from 1 to 10 mm thick.
SCOPE OF APPLICATION
Ultraplan Eco 20 is a leveling compound for leveling new and existing sleepers, applied in a layer thickness of 1 to 10 mm after priming the substrate.
Ultraplan Eco 20 is suitable for leveling thresholds before laying ceramic tiles, natural stone, laminated panels (floating), vinyl panels, flexible and textile flooring indoors.
TECHNICAL CHARACTERISTICS
Ultraplan Eco 20 is a grey-beige, dry mortar.
composed of special, fast setting cements, selected silicon aggregates, resins and special additives developed in MAPEI laboratories.
Hardens without shrinkage, and when fully set it achieves good strength for bending and excellent adhesion to the floor.
After mixing Ultraplan Eco 20 with water we get mortar with the following properties:
• very good flow;
• the possibility of obtaining a very smooth surface;
• high efficiency;
• the ability to prepare and distribute pump assistance;
• simple application;
• Possibility of pedestrian traffic after 3 hours;
• can be used under loaded floors moving furniture on wheels;
• can be used for underfloor heating;
• excellent grip on the ground;
• shrink-free drying;
• accurate filling of very small irregularities;
• Ideal for precision work with a thin layer of levelling.
RECOMMENDATIONS
• Do not add water to the mortar. that has already started to bind.
• Do not add lime or cement to the mortar and gypsum.
• Do not use outdoors and indoors with constant pull-up of moisture through the primer.
• When applying a second coat of Ultraplan Eco 20 first coat it should be completely dry (at least 24 hours) and primed with Mapegrunt Primer Plus (undiluted), Primer G Pro (diluted 1:1 with water) or Eco Prim T (diluted with water). in a ratio of 1: 2).
• There is also the possibility of applying the second coat of Ultraplan Eco 20 after a maximum of 3-4 hours from the first application and without using a primer (wet-on-wet method).
• Do not apply the mass at temperatures below + 5 ° C and above + 35 ° C and timely heat, in strong sunlight or in the event of strong drafts, it is recommended to cover with foil after 1 hour of application to prevent pouring it drying is too fast, which can cause cracks on the surface of the mass.
• Do not use for leveling substrates wood, metal and other deformable substrates (in these cases use Ultraplan renovation).
mortar preparation
Pour 5.75 liters clean into a clean bucket of water and then pour the entire contents into a 23kg Ultraplan Eco 20 bag.
Mix low-speed mixer until obtaining a homogeneous liquid mass no lumps.
Prepare the mortar in this way and let it work for 2-3 minutes, then mix again.
Double mixing is necessary for proper activation of all the components of the mass.
Mortar Ultraplan Eco 20 maintains its working properties and should be used within 20-30 minutes after preparation (at the optimal temperature of + 23 ° C and relative humidity in the room 50%).
Before pouring from the bucket, the mass should be confounded each time.
finish of the floor
Installation of ceramic and stone facings insensitive to moisture can be started after min 24 hours after pouring the mass (at + 23 ° C and 50% humidity).
For moisture-sensitive linings (natural stone, textile covers, etc.)
It is believed that the drying time should be 24 hours per 5 mm poured mass (at + 23 ° C and 50% humidity air).
Changes in air temperature, its humidity and the thickness of the layers used Ultraplan Eco 20 can shorten or lengthen the drying time of the product.
For cladding non-diffusive, ie impermeable to water and vapor (e.g. vinyl panels, PVC), it is recommended to start assembly after the mass has completely dried, ie 48-72 hours depending on the thickness of the layer.
NOURISHMENT
1.6 kg / m² per mm thickness.
DELIVERY FORM
Bags 5 x 23 kg, 10 x 23 kg, 15 x 23 kg, 20 x 23 kg
STORAGE
12 months in the unopened original container.
Important information
If you require a larger quantity and we don't have that many items on the auction, send us a message and our team will evaluate the goods and shipping.
| particularities | |
|---|---|
| brand | |
| material | |
| manufacturer number | |
| volume | |
| Unit of measurement | |
| Product Type | |
| Manufacturing Country And Region | |
| color | |
| size | 10 bags x 23kg, 15 bags x 23kg, 20 bags x 23kg, 5 bags x 23kg |
Related products
€ 48.50
- GBP: 40.84£
€ 60.00 – € 180.00
- GBP: 50.53£ - 151.58£
€ 95.00
- GBP: £80.00
-6%
€ 123.00 – € 2,600.00
- GBP: 103.58£ - 2,189.46£
