Knauf SILICONE RESIN EG-FARBE 15L white color-leveling silicone resin paint
- GBP: £0.00
21 in stock
Knauf SILICONE RESIN EG COLOR 15L white
Color leveling silicone resin paint
Highly permeable, matt silicone resin leveling paint for one-time, structure-preserving painting over mineral finishing plasters.
Color white (approx. RAL 9016)
Can be tinted according to the Knauf ColorConcept color shade fan
scope of application
Silicone-Resin-EG-Paint is specially designed for the leveling (single rolling over) of mineral finishing plasters in order to level and even out color differences in the plaster surface caused by drying, weathering or processing.
Before processing, the color shade must be checked for correctness. In the case of colored silicone resin EG paint on contiguous surfaces, only use materials with the same batch number (in the case of repeat orders, state the consignment number of the previous delivery) or mix materials from different batch numbers together.
Before processing, stir silicone resin EG paint thoroughly with an electric stirrer. Apply silicone resin EG paint generously, evenly and undiluted or with a maximum of 5 % water to the substrate. A primer coat diluted with max. 10 % water may be required on surfaces with different levels of absorption. The paint can be applied by brushing, rolling or spraying with airless devices.
Clean equipment and tools with water immediately after use. Wash off paint splashes immediately with clear water.
Highly permeable, matt silicone resin leveling paint for a one-off,
structure-preserving painting over of mineral finishing plasters.
Silicone resin emulsion, polymer dispersion, titanium dioxide, water, fillers, additives, color pigments, preservatives
Can be stored cool and frost-free in the original container for 24 months. opened container
The product is subject to constant factory production control and
Corresponds to EN 1062-1 and DIN 18363 Section 2.4.1.
properties and added value
■ For outside
■ Noble mineral appearance
■ Highly permeable
■ High yield
■ Low stress
■ Color white (approx. RAL 9016)
■ Can be tinted with the Knauf ColorConcept tinting system
scope of application
Silicone resin EG paint is specially designed for leveling (single rollover)
matched to mineral finishing plasters in order to resist drying, weathering and
to equalize processing-related color differences in the plaster surface
Plaster base according to VOB part C, DIN 18350, DIN 18345, paragraph 3.1 or according to
Check VOB part B, DIN 1961 § 4 number 3. Cleaning base from dust and loose
Clean parts, eliminate rough bumps. substrate preparation
according to the substrate according to the table "Substrate and pre-treatment". All substrates must be stable, dry, level and free of grease, dust and
adhesion-reducing residues. Observe BFS leaflet 9, paragraph 5.2.
Existing coatings (paints and old plaster) for load-bearing capacity and
Check compatibility with silicone resin EG paint. Dirt-sensitive components before starting in accordance with the information sheet "Masking and masking work
for painting and stucco work” by the Federal Association for Construction and Facades. Weather-side work surfaces from precipitation and more direct
Protect from sun exposure.
Before starting work, check the color and batch number on all containers and test the color shade for correctness. Do not process different containers together on one side of the house or beforehand
mix together in a clean container. Stir the contents of the container well. Silicone resin EG paint is ready to use with up to 5 % water
set. As a primer, it can be diluted with up to 10 % water.
Dilute with approx. 5 % water for airless processing. If too strong
Dilution deteriorates the hiding power as well as the promised
Silicone resin EG paint thin and even, seamless and wet on wet
Apply to the solid, clean and dry plaster surface, finishing plaster or paint. Always finish areas that can be viewed together on the same day.
Do not settle within an area. Always work in such a way that scaffolding transitions are rolled or painted wet on wet. The processing
is mainly done by hand using a paint roller or paintbrush. large areas
can also be sprayed with the airless device, provided that contamination from the paint mist is not a problem.
Do not apply at air, material and/or substrate temperatures below +5 °C and above +30 °C. Fresh coatings against the effects of moisture, e.g. B. rain, and from too rapid dehydration, z. B. by direct
Insolation or strong wind, by taking appropriate measures
like protective tarpaulins protect. Silicone resin EG paint not on preheated
apply to substrates.
Silicone resin EG paint is at +20 °C and 65 % relative humidity
approx. 12 hours surface dry. These times are longer at lower temperatures and/or higher humidity. Between the coats of paint
Allow at least 24 hours drying time, but no more than 7 days.
Thoroughly dry and resilient after at least 3 days.
If you require a larger quantity and we don't have that many items on the auction, send us a message and our team will evaluate the goods and shipping.
We invite you to our other auctions. We have a wide range of building materials and interior design tools !!!
* ONLY ORIGINAL FROM THE MANUFACTURER *
MasterBau has been active on the European market for 10 years as a distributor of various building materials from Caparol, Graco, Fakro, Tytan, Knauf, Mapei and many others.
We will ensure delivery across Europe.
Our motto is customer satisfaction through the highest quality of the delivered products.
Some of the products we have purchased can be returned in their original sealed packaging or in their original condition within 14 days without giving a reason.
Returns are made at the buyer's expense.
If you have any complaints, please contact the following address:
Mariana Rapackiego 21A
We welcome any positive review.
If you are unsatisfied or have any problems with shipping, please don't hesitate to contact us before evaluating.