Remmers BIT Primer (basic) protective coating solvent-free bitumen emulsion primer 5kg/10kg/25kg
Remmers BIT Primer (basic) consumption
Primer: at least 0.025 kg/m² (1:10 with water)
Protective coating: at least 0.25 kg/m² per work step
Additives: 30 – 50 kg/m³ mortar
areas of application
Protective coating on concrete, masonry and plaster in the ground
Primer under bituminous waterproofing (PMBC)
Capillary closure
Additives for the treatment of mineral mortar products
properties
Solvent-free
Moisture resistant
Heat and cold resistant
Can be diluted with water
Resistant to water that attacks concrete (DIN 4030 XA3)
Product Specifications
Density (20 °C) Approx. 1 kg/l
Based on solvent-free bitumen emulsion
Consistency Liquid
pH value approx. 10
processing
Processing Conditions
Material, ambient and substrate temperature: min. +5 °C to max. +30 °C.
Ready to use, can be processed directly from the container.
Apply material in several layers to the prepared surface.
If necessary, dilute with water.
If necessary, add mineral mortar products to the mixing water.
Processing instructions
In the case of sealing materials that are to be processed in liquid form, this can be done directly
Sunlight and/or wind exposure leads to accelerated skin formation and accompanying blistering.
Further waterproofing layers only after the previously created ones have sufficiently solidified Apply layer.
Fresh areas from rain, direct sunlight, frost and condensation protection.
Protect dry sealing from mechanical damage and UV radiation.
Hints
Deviations from current regulations must be agreed upon separately.
The existing test certificates must be observed during planning and execution.
size / quantity
5kg/10kg/25kg
* ONLY ORIGINAL FROM THE MANUFACTURER *