Knauf Super Finish 28kg x 3
Putty SHEETROCK
Knauf Super Finish consists of calcium carbonate, as well as other fillers, additives and binders and is a filler and fine filler type 3A according to EN 13963.
application
Knauf SuperFinish is a ready-to-use all-purpose filler. It is suitable as a joint finish (Q2), as well as for full-surface filling (quality levels Q3 and Q4), and for smoothing numerous substrates.
Indoors, SuperFinish can be used e.g. B. be used on substrates such as plasterboard, gypsum fiber boards, concrete, aerated concrete, plaster or block masonry.
Indoors, SuperFinish can be used e.g. B. be used on substrates such as plasterboard, gypsum fiber boards, concrete, aerated concrete, plaster or block masonry.
properties
ready to use
no mixing and maturing times
smooth consistency
easy to process
very easy to grind
Quality levels Q2 to Q4
good adhesion
substrate preparation
The substrate must be dry, stable, firm, level and clean. Existing release agents, e.g. B. Paste or waste must be removed.
Gypsum boards must be firmly mounted on a load-bearing substructure, dry, clean and free of dust in the joint area. Larger gaps are to be filled with the gypsum filler Knauf Trias or Knauf Uniflott.
Pre-filled joint areas must be completely dry and well adjusted to the panel surface.
Gypsum boards must be firmly mounted on a load-bearing substructure, dry, clean and free of dust in the joint area. Larger gaps are to be filled with the gypsum filler Knauf Trias or Knauf Uniflott.
Pre-filled joint areas must be completely dry and well adjusted to the panel surface.
processing
The material should be stirred well; Knauf Superfinish can be made thinner with a little water if necessary. A clean mixing vessel and clean tools must be used. The fine filler can be applied and leveled with a Swiss trowel, smoothing trowel, screw-grip spatula or surface spatula.
The filler hardens through drying, depending on the humidity and ambient temperature.
The material, substrate and air temperature must not fall below +10 °C during processing and until it is completely dry.
The material, substrate and air temperature must not fall below +10 °C during processing and until it is completely dry.
Hints
Knauf SuperFinish must not be mixed with other materials. Devices and tools must be cleaned with water after use.
With thicker layers, depending on the temperature and humidity, longer drying times must be taken into account.
material requirements
consumption | Yield per bucket | |
Quality level Q2 as joint finish | 0.1kg/m² | 200 sqm |
Quality level Q3 based on Q2 | 0.5kg/m² | 40 m² |
with full-surface use, Quality level Q4 building up on Q2 (per mm thickness) | 1.6kg/m² | 12.5 m² |
Filling of edge connection with Trenn-Fix: Depending on the cladding thickness, approx. 0.15 to 0.25 kg per m edge connection joint.
All information are approximate values and may vary depending on the substrate. The exact consumption is to be determined on the object.
All information are approximate values and may vary depending on the substrate. The exact consumption is to be determined on the object.
packaging size: 3 Bucket x 28KG
* ONLY ORIGINAL FROM THE MANUFACTURER *