Pattex FIX Extreme Power 385g construction adhesive polymer adhesive

 

Pattex FIX Extreme Power is a universally applicable, one-component assembly adhesive with a high initial adhesion of up to 350 kg/m². Thanks to the use of the FAST ADHESIVENESS formula, even very heavy objects do not need to be supported and fixed.

 

APPLICATION:

Pattex FIX Extreme Power is a universally applicable, one-component assembly adhesive with high
It has a high initial adhesion of up to 350 kg/m2. Thanks to the use of the FAST ADHESIVENESS formula, even very heavy objects do not need to be supported or fixed.
and sedation.
Pattex FIX Extreme POWER adheres permanently to very heavy elements such as: heavy bricks, heavy ceramic tiles, concrete elements, heavy stone slabs and plasterboard, hard, durable and resistant.
The adhesive bonds very heavy components such as: heavy bricks, heavy ceramic tiles, concrete elements, heavy stone and plasterboard, hardboard, plywood, MDF boards, wood,
PVC-U and polystyrene. The prerequisite for sufficient adhesion
Adhesive is the absorbency of one of the bonded surfaces.
Do not apply to surfaces that are constantly exposed to water, such as polyethylene, polypropylene, teflon, etc.
Pattex FIX Extreme POWER can also be used to fill small defects in the surface up to 10mm.
The adhesive can be painted over after it has completely dried
Acrylic dispersion based paints.

 

PROPERTIES:

EXTREME PRIMARY ADHESION UP TO 350 kg/m² (*35 g/cm² confirmed by Henkel's internal laboratory tests);
RAPID ADHESION IN 1 SECOND (full adhesion after 48 hours at +20°C);
gluing of very heavy objects;
For absorbent materials;
For interiors;
Odorless;
Fills voids in substrate up to 10mm;
Can be deleted;
Requires an absorbent surface;
Easy to clean;

 

TECHNICAL SPECIFICATIONS:

Basis: acrylate dispersion
Color white
Opening time: approx. 25 minutes
Density: 1.3 g/cm3
Full curing time: up to 48 hours depending on
depending on the adhesive layer thickness
Application temperature: from +100C to +400C
Temperature resistance: from -200C to +700C
Initial adhesion: about 35 g/cm2
Final strength (DIN EN 205): 4-5 N/mm2
Consumption (for flat surfaces): approx. 400 g/m2
Void filling: max. up to 10 mm

 

Possible areas of application:

Wood;
brick;
Concrete;
ceramics;
Stone;
plasterboard;
fiberboard;
Plywood;
MDF;
PVC-U;
polystyrene;

 

Packaging: 385 g cartridge